Tilting Angle Table

Product Description

About the Tilting Angle Table

This accessory offers a great variety of setup options. With the base mounted square to the mill table, parts mounted to the tilted table can be machined or drilled at precise angles. It can be set at any angle from 0° to 90°. The hole pattern in the table accepts Sherline’s mill vise and rotary table. A threaded chuck mount is also included, which means parts from the lathe can have machining operations done on them without removing them from the chuck. They can then be put back on the lathe for further operations without re-centering.

Chamfers can be milled using the tilting angle table on a mill.

With the rotary table mounted to the table and tilted, many additional machining possibilities are opened up. The pre-drilled and tapped hole pattern is laid out so that when the rotary table is rotated to the 90° position, its center is the same height as the right angle adjustable tailstock P/N 3702. This eliminates the need for the P/N 3701 right-angle attachment.

Like the 90° Angle Plate P/N 3559 and the Rotary Table P/N 3700, this accessory can also be useful for setups on other machines in addition to your Sherline machines.

Examples of mounting a Rotary Table to the Tilting Angle Table

3700 on tat
Standard Rotary table (P/N 3700)
Click on the image for a larger view.
3700-OP on tat
Reverse Mount Rotary table (P/N 3700-OP)
Click on the image for a larger view.

The improper use of machine tools and their accessories can result in serious injury. Before using this tool, thoroughly read the instructions and make sure you understand its proper and safe use.


Always wear safety glasses when operating machine tools.

Download PDF 3750 Instructions

Instructions PDF Download

Tilting Angle Table
Tilting Angle Table Material Aluminum
Body Coating N/A
Body Dimensions (H x W x D) 2.625″ x 6″ x 4.125″
37540 Tilting Angle Table Bottom Plate
37510 Tilting Angle Table Top Plate
37520 Tilting Angle Table Side Plate, Plain
37530 Tilting Angle Table Side Plate, Engraved
37550 Tilting Angle Table Bushing (2)
37560 Tilting Angle Table 3/4-16 Chuck Hold Down
30561 10-32 T-Nuts (4)
40670 10-32 x 1/2” SHC Screw (13)
40660 3/16” I.D. Washer (2)
50120 Pointer
32100 10-32 hex nut
37531 8-32 X 3/8″ Pan Head Phillips Screw