3/8″ Drill Chuck plus chuck key, drawbolt and #1 Morse arbor.
The P/N 3073 3/8″ chuck includes a #1 Morse arbor and drawbolt, so that it can be mounted in the headstock of the lathe or mill. P/N 3072 has the same size capacity as the P/N 1069 chuck, which is 3/32″ to 3/8″ drill sizes.
NOTE: If runout of less than .003″ amount is required, collets should be used to hold the drill rather than a chuck.
|
|
Always wear safety glasses when operating machine tools. |
| Chuck Capacity | 3/32″ (2.4 mm) – 3/8″ (9.5 mm) | |
|---|---|---|
| Arbor | #1 Morse for headstock | |
| Runout | .003″ or less | |
| Includes | chuck key, drawbolt+washer and 1 arbor |
| 11861 | Rohm S8 chuck key |
|---|---|
| 11880 | threaded arbor – #1 Morse taper | 11801 | 3/8″ drill chuck body |
| 30880 | 1/4-20 x 5″ drawbolt with centering washer (for #1 Morse arbor) |
This chuck includes a #0 Morse arbor for use in the tailstock for center drilling and a #1 Morse arbor for use in the headstock. It will hold drills from 3/32″ (2.4 mm) to 3/8″ (9.5 mm) in diameter. Runout … Continued
| There are no products |
